Zanussi ZGL648IB Uživatelský manuál stáhnout pdf (Strana 6)

6. Electrical Connection

The appliance is designed to be connected to 230 V ~

50 Hz electricity supply.

The connection must be carried out in compliance with

the laws and regulations in force.

Before the appliance is connected:

1) check that the main fuse and the domestic installation

can support the load (see the rating label);

2) check that the power supply is properly earthed in

compliance with the current rules;

3) check the socket or the double pole switch used for

the electrical connection can be easily reached with

the appliance built in the forniture unit.

The appliance is supplied with a connection cable. This

has to be provided with a proper plug, able to support the

load marked on the identification plate. The plug has to

be fitted in a proper socket.

If connecting the appliance directly to the electric system,

it is necessary that you install a double pole switch

between the appliance and the electricity supply, with a

minimum gap of 3 mm. between the switch contacts and

of a type suitable for the required load in compliance

with the current rules.

The connection cable has to be placed in order that, in

each part, it cannot reach a temperature 50 °C higher

than the room temperature.

The manufactures declines all responsibility

should the safety laws and regulations not be

respected.

1 2 3 4 5 6 7 8 9 10

Žádné komentáře

Zanussi ZGL648IB Uživatelský manuál Strana 6