Zanussi ZOG21411XK Uživatelský manuál stáhnout pdf (Strana 14)

more effective ventilation, for example increas-

ing the level of mechanical ventilation where

present.

Gas connection

The gas supply ramp is on the rear side of the

control panel.

Warning! Do not use rubber flexible

pipes.

Warning! Before the gas connection,

disconnect the mains plug from the

mains socket or deactivate the fuse in the

fuse box. Close the primary valve of the

gas supply.

A

B

C

A

B

C

D

E

A) Flexible metallic

pipe

B) Gasket

C) Gas supply ramp

A) Rigid metallic

pipe

B) Nut

C) Olive

D) Male / female

adapter

E) Gas supply ramp

1. Do not fully move the oven into the built-in

cabinet (about 30 cm).

There are two connection modes:

a) Connection with flexible metallic pipe

(maximum 2 m):

• Put the supplied gasket between

the pipe and the gas supply ramp.

• Turn the pipe to the 1/2“ gas supply

ramp.

b) Connection with rigid metallic pipe

(soft copper, minimum diameter: 8

mm):

• Use a male / female adapter (not

supplied) to install the nut and the

olive on the gas supply ramp.

• Put the pipe into the gas supply

ramp.

2. Use a 22 mm spanner to tighten the nuts.

Keep the gas supply ramp in correct posi-

tion, do not apply force on the gas supply

circuit.

3. Fully insert the appliance into the built-in

cabinet.

4. Seal the connection correctly. Use a leak

detection to control it.

Warning! Do not use a flame to con-

trol for leaks!

Warning! Do not squeeze the gas supply

ramp and the pipe when you move the

oven into the built-in cabinet.

Warning! Only for Russia: this

appliance operates with the natural

gas G20 20 mbar. Before the gas

connection, it is important to adjust the

setting to the correct type of gas (G20 13

mbar). Refer to the instructions in

"Adjustment to different types of gas".

Adjustment to different types of gas

Warning! Let only an authorized person

do the adjustment to different types of gas.

This appliance is for operation with natural

gas.

With the correct injectors, you can also operate

it with liquid gas.

The gas rate is adjusted to suit.

Replacing the gas oven burner injector:

14

www.zanussi.com

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

Komentáře k této Příručce

Žádné komentáře