Zanussi ZKS851DX Uživatelský manuál Strana 14

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 20
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 13
Packaging material
The packaging materials are environmentally
friendly and can be recycled. The plastic components
are identified by markings, e.g. >PE<, >PS<, etc.
Please dispose of the packaging materials in the ap-
propriate container at your local waste disposal facili-
ties.
Installation Instructions
Safety instructions
Warning! This must be read!
The laws, ordinances, directives and standards in force
in the country of use are to be followed (safety regula-
tions, proper recycling in accordance with the regula-
tions, etc.)
Installation may only be carried out by a qualified elec-
trician. The minimum distances to other appliances and
units are to be observed.
Anti-shock protection must be provided by the instal-
lation, for example drawers may only be installed with
a protective floor directly underneath the appliance.
The cut surfaces of the worktop are to be protected
against moisture using a suitable sealant.
The sealant seals the appliance to the work top with no
gap. When building in, protect the underside of the ap-
pliance from steam and moisture, e.g. from a dish-
washer or oven.
Avoid installing the appliance next to doors and under
windows. Otherwise hot cookware may be knocked off
the rings when doors and windows are opened.
Warning! Risk of injury from electrical current.
The electrical mains terminal is live.
Make electrical mains terminal free of voltage.
Follow connection schematic.
Observe electrical safety rules.
Ensure anti-shock protection by installing correctly.
The appliance must be connected to the electrical
supply by a qualified electrician.
Loose and inappropriate plug and socket connec-
tions can make the terminal overheat.
Have the clamping connections correctly installed
by a qualified electrician.
Use strain relief clamp on cable.
In the event of single-phase or two phase connec-
tion, the appropriate mains cable of type H05BB-F
Tmax 90°C (or higher) must be used.
If this appliance’s mains cable is damaged, it must
be replaced by a special cable (type H05BB-F Tmax
90°C; or higher).The latter is available from the Cus-
tomer Care Department.
A device must be provided in the electrical installation
which allows the appliance to be disconnected from the
mains at all poles with a contact opening width of at
least 3 mm.
Suitable isolation devices include line protecting cut-
outs, fuses (screw type fuses are to be removed from
the holder), earth leakage trips and contactors.
Assembly
min. 500 mm
min.
500 mm
min. 5 mm
14
Zobrazit stránku 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Komentáře k této Příručce

Žádné komentáře