Zanussi ZGG62413WA Uživatelský manuál stáhnout pdf (Strana 8)

CAUTION!

Make sure that the bottoms of pots

do not stand above the control knob,

otherwise the flame heats the

control knob up.

CAUTION!

Make sure that pot handles are not

above the front edge of the cooktop.

CAUTION!

Make sure that the pots are placed

centrally on the burner in order to

get maximum stability and to get

lower gas consumption.

Energy saving

• If it is possible, always put the lids on the

cookware.

• When the liquid starts to boil, turn down the

flame to barely simmer the liquid.

Diameters of cookware

Use cookware with diameters

applicable to the size of burners.

Burner Diameter of

cookware

(mm)

Rapid 180 - 260

Semi-rapid 120 - 220

Auxiliary 80 - 180

Care and cleaning

WARNING!

Refer to Safety chapters.

General information

• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface have

no effect on how the hob operates.

• Use a special cleaner applicable for the

surface of the hob.

Stainless steel

• Wash stainless steel parts with water, and

then dry them with a soft cloth.

• To remove burn food, fat and stubborn

stains, let them soak for a few minutes in a

small amount of mild detergent before

cleaning.

• Use cleaning products designed specifically

for cleaning stainless steel in order to

protect the steel surfaces.

• Do not use cleaning products containing

corrosive chemicals such as chlorides, do

not clean the surface with disinfectants, stain

or rust removers and immersion cleaners.

Pan supports

The pan supports are not resistant

to washing in a dishwasher. They

must be washed by hand.

1. Remove the pan supports to easily clean

the hob.

Be very careful when you

replace the pan supports to

prevent the hob top from

damage.

2. The enamel coating occasionally can have

rough edges, so be careful when you wash

the pan supports by hand and dry them. If

necessary, remove stubborn stains with a

paste cleaner.

3. After you clean the pan supports, make sure

that they are in correct positions.

4. For the burner to operate correctly, make

sure that the arms of the pan supports are

aligned with the centre of the burner.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar. If not,

the dirt can cause damage to the hob. Take

care to avoid burns.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat stains,

shiny metallic discoloration. Clean the hob

with a moist cloth and non-abrasive

detergent. After cleaning, wipe the hob dry

with a soft cloth.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy water

8 www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Komentáře k této Příručce

Žádné komentáře