Zanussi ZCK95206WA Uživatelský manuál Strana 12

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 24
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 11
Using the turnspit
WARNING!
Be careful when you use the
turnspit. The forks and the spit are
sharp. There is a risk of injury.
WARNING!
Use oven gloves when you remove
the turnspit. The turnspit and the grill
are hot. There is a risk of burns.
CAUTION!
The maximum weight permitted on
the turnspit is 4.5 kg.
A B
C
D
A) Support hook
B) Forks
C) Spit
D) Handle
The support hook is installed in the
top of the oven cavity.
You can leave the support hook in
the oven, when the turnspit is not
active.
1. Open the oven door.
2. Put the turnspit handle into the spit.
3. Put the baking tray on the lowest shelf level.
4. Snap out one end of the support hook from
the oven ceiling A and let it hang on the
other end.
A
5. Install the first fork on the spit, then put the
meat on the turnspit and install the second
fork.
Make sure that the meat is in the middle of
the spit.
6. Use the screws to tighten the forks.
7. Put the tip of the spit into the turnspit hole.
Refer to "Product description" chapter.
8. Put the front part of the spit on the support
hook.
9. Remove the turnspit handle.
10. Turn the knob for the oven functions to the
turnspit position .
11. Set the necessary temperature.
12. Make sure that turnspit rotates.
13. Close the oven door.
The turnspit does not stop if you open the
oven door.
When meat is ready turn the knobs for the oven
functions and temperature to the off position.
Turn off the grill. Install the turnspit handle.
Carefully remove the turnspit and the roasting
pan from the oven.
12 www.zanussi.com
Zobrazit stránku 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Komentáře k této Příručce

Žádné komentáře