GBUser manual 2DishwasherZDT111
Caution! If the basket is in the upper position, donot put cups on the cup racks.Use of detergentOnly use detergents (powder, liquid or tablet) thata
Setting and starting a washing programmeSet the washing programme with the door ajar. Thewashing programme only starts after you close thedoor. Until
12Fully clean the filters A, Band C below running wa-ter.3To remove filters B and C,turn the handle approxi-mately 1/4 anticlockwise.4Remove the flat
Fault code and malfunction Possible cause and solution• continuous flash of the light of the run-ning programme• intermittent audible signal• 1 flash
The cleaning results are not satisfactoryLimescales particles on the dishes • The salt container is empty.• The water softener is adjusted on a wrong
InstallationWarning! Make sure that mains plug isdisconnected from the mains socket duringinstallation.Important! Obey the instructions in the enclo
Drain hose1Connect the water drainhose to the sink spigot.max 85 cmmin 40 cmmax 400 cm234The internal diameter must not be smaller than the diam-eter
17
ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Washing programmes _ _ _ _ _ _ _ _
www.zanussi.com156951020-00-032009
• Do not change the specifications or modify this prod-uct. Risk of injury and damage to the appliance.• Do not use the appliance:– if the mains cable
Indicator lightsEnd The indicator light comes on when the washing pro-gramme is completed. Auxiliary functions:• Level of the water softener.• Activat
Washing programmesWashing programmesProgrammeDegree ofsoilType of load Programme description Half load optionHeavy soilCrockery, cut-lery, pots andpan
The pressure and temperature of the water, the var-iations of power supply and the quantity of dishescan change these values.Use of the applianceRefer
12Set switch to position 1 or2.Electronic adjustmentThe water softener is set at the factory at level 5.1. Switch on the appliance.2. Make sure that t
Use of rinse aidCaution! Only use branded rinse aid fordishwashers.Do these steps to fill the rinse aid dispenser:1 2M A X1 2 3 4 +34M A X1
– Make sure that glasses do not touch other glasses.– Put small objects in the cutlery basket.• Plastic items and pans with non-stick coatings cankeep
Komentáře k této Příručce